GD-150C二轴数控精密段差外圆磨床采用头尾架两顶的结构方式，自动刃磨外径2- 120mm，长度小于300mm的外圆、外锥面及倒角。
1、二轴数控精密段差外圆磨床采用新代伺服控制系统，并配置段差磨削程序，配置在线修整装置。工件头架采用日本NSK精密主轴轴承，砂轮发蓝能同
时装2片砂轮，满足一次装夹完成粗、精磨的工艺需求。
2、机床配置自动冷却装置和吸雾装置、自动灭火装置、冷却系统异常保护程序、报警蜂鸣器，机床正面活动拉门、左右及后面有维修
门，摆动式按钮，工人启停按钮。
GD-150C | |
砂轮架左右移动有效行程X轴 Left and Right Effective Travelling of Grinding Wheel Frame X-axis X-axis | 350 mm |
砂轮架前后移动有效行程Y轴 Feed and Back Effective Travelling of Grinding Wheel Frame Y-axis | 180 mm |
砂轮轴转速（变频调速）Rotation Speed of Grinding Wheel Frame (Frequency Conversion and Adjusted Speed) | 1000～3000rpm |
砂轮线速度 Linear Velocity of Grinding Wheel | 18～54m/s |
砂轮主轴功率 Spindle Power of Grinding Wheel | 4KW |
砂轮尺寸（金刚石砂轮）Grinding Wheel Size (Diamond Grinding Wheel) | 350×127×20/65 |
工件头架中心高 Centre Height of Workpiece Head Stock | 105mm |
工件头架A轴转速（变频调速）A-axis Rotation Speed of Workpiece Head Stock (Frequency Conversion and Adjusted Speed) | 0-500rpm |
工件头架锥孔 Bore-Hole of Workpiece Head Stock | Is050 |
工作台水平面内凋整角度（配有千分表微调安装附件）Adjusted Angle in Horizontal Plane of Work table (Has Dial Gage to install attachment) | +10°/-10°每格读数值为0.5º |
工件头架水平面内凋整角度 Adjusted Angle in Horizontal Plane of Work Head Stock | +70°/-70°每格读数值为1º |
工件磨削直径范围 Grinding Diameter Range of Workpiece | Φ2—Φ120mm |
工件磨削大长度 Grinding Max. Length of Workpiece | 300mrn |
工件主轴径向跳动 Workpiece Spindle Redial Runout | ≤0.005mm |
磨头主轴径向跳动 Grinding Head Spindle Redial Runout | ≤0.005mm |
X轴分辨率 X-axis Resolving Power | 0.00lmm |
Y轴分辨率 Y-axis Resolving Power | 0.00lmm |
机床外形尺寸 Machine Size | 1800×1650×1750 |
机床重量 Machine Weight | 2.5T |
所有评论仅代表网友意见，与本站立场无关。