品牌/Brand：NTH
此夹头采用工件端面夹持方式，可防止在夹持过程中的工件变形，适用于薄片工件夹持加工。
此夹头具有夹持补偿机构，适用于端面不规则的工件。
此夹头可搭配气密检测装置。
To prevent deformation of workpiece for gripping the end surface, suitable for thin workpiece process.
The compensating mechanism of gripping that can clamp irregular surface workpieces.
It can go with the check device to inspect the clamping status.
尺寸单位/Size unit: mm
| 规格 Spec 型号 Model | 楔心行程 Plunger stroke mm | 爪行程直径 Jaw stroke Dia. mm | 大夹持直径 Max chucking Dia. mm | 小夹持直径 Min chucking Dia. mm | 容许油压缸推力 Max.D.B.Pull KN(kgf) |
|---|---|---|---|---|---|
| 2F-05 | 12 | 8 | 53 | 25 | 5.0(510) |
| 2F-06 | 12 | 8 | 79 | 55 | 6.0(512) |
| 2F-08 | 12 | 8 | 106 | 75 | 12.0(1224) |
| 2F-10 | 12 | 8 | 150 | 119 | 12.0(1224) |
| 2F-12 | 12 | 8 | 200 | 169 | 12.0(1224) |
| 规格 Spec 型号 Model | 大夹持力 Max clamping force KN(kgf) | 高转速 Max RPM | 惯性矩 I kg*m2 | 重量 Weight kg | 适合油压缸 Matched cylinders | 大使用压力 Max Pressure Mpa(kgf) |
|---|---|---|---|---|---|---|
| 2F-05 | 4.0(408) | 4000 | 0.015 | 9 | S-100R/SNK-100 | 0.7(7) |
| 2F-06 | 5.0(510) | 4000 | 0.035 | 9.8 | S-100R/SNK-100 | 0.8(8) |
| 2F-08 | 11.0(1122) | 3500 | 0.12 | 20.3 | S-100R/SNK-100 | 1.7(17) |
| 2F-10 | 11.0(1122) | 3500 | 0.28 | 30.7 | S-100R/SNK-100 | 1.7(17) |
| 2F-12 | 11.0(1122) | 3000 | 0.52 | 41.2 | S-100R/SNK-100 | 1.7(17) |
规格 Spec
型号 ModelA B C D F G Max G Min J J1 K 2F-05 135 86 110 82.6 40 75 55 25 10 M12×1.75 2F-06 165 86 140 104.8 45 75 55 28 14 M16×2 2F-08 210 90 170 133.4 56 80 60 38 16 M20×2.5 2F-10 254 95 220 171.4 56 75 55 38 16 M20×2.5 2F-12 304 95 220 171.4 56 75 55 38 16 M20×2.5
规格 Spec
型号 ModelL L1 M Max M Min N P Q R S T U 2F-05 M10 15 56 36 20 M10 42.5 27 4-M6 50 30° 2F-06 M10 15 56 36 20 M10 57.5 40 4-M8 64 50° 2F-08 M12 18 71 51 25 M12 77.5 53.5 6-M8 104 50° 2F-10 M16 24 71 51 25 M12 99.5 75.5 6-M8 140 50° 2F-12 M16 24 71 51 25 M12 124.5 100.5 6-M8 190 50°
保留技术更改的权利,恕不另行通知 Subject to technology changes without prior information
非标需求可定做 Non-standard requirements can be made
所有评论仅代表网友意见，与本站立场无关。