您好,欢迎来到淘生意平台!请 |免费注册

产品展厅本站服务收藏该商铺

青岛森泉光电有限公司

免费会员
手机逛
青岛森泉光电有限公司

Product Display

产品展示

当前位置:青岛森泉光电有限公司>>光电器件>>其他光电器件>> 818-MSCOPENewport 818-MSCOPE 显微镜载玻片功率传感器 350-1100nm 新产品

Newport 818-MSCOPE 显微镜载玻片功率传感器 350-1100nm 新产品

产品二维码
参  考  价:面议
具体成交价以合同协议为准
  • 产品型号:818-MSCOPE
  • 品牌:
  • 产品类别:光电传感器
  • 所在地:
  • 信息完整度:
  • 样本:
  • 更新时间:2022-06-13 09:27:58
  • 浏览次数:16
收藏
举报

联系我时,请告知来自 淘生意平台

青岛森泉光电有限公司

代理商

  • 经营模式:代理商
  • 商铺产品:910条
  • 所在地区:山东青岛市
  • 注册时间:2020-12-31
  • 最近登录:2020-12-31
  • 联系人:赵经理 (销售经理)
产品简介

Newport 新产品 显微镜载玻片功率传感器产品型号:818-MSCOPE产品和货期:请致电咨询产品介绍: The818-MSCOPEisaMicroscopeSlidepowersensorthatmeasurestheopticalpoweratthesampleplaneinamicroscopysetup

详情介绍

Newport 新产品 显微镜载玻片功率传感器

产品型号:818-MSCOPE

产品和货期:请致电咨询


产品介绍:

The 818-MSCOPE is a Microscope Slide power sensor that measures the optical power at the sample plane in a microscopy setup. The silicon photodiode measures from 350 to 1100 nm at optical powers ranging from 3µW to 1W and is designed to be a microscopy power sensor that answers the needs of fluorescence excitation measurements. The sensor has a footprint of 76.0 mm x 25.2 mm matching that of a standard microscope slide. The sensing area is protected and cleanable sealed so that it can measure with in an immersion medium such as water or glycerol as well as in air. The sensor has a 1.5 meter long cable for connecting to a meter or PC interface.

818-MSCOPE是显微镜载玻片功率传感器,用于测量显微镜设置中样品平面的光功率。硅光电二极管措施从350到1100纳米光学的权力从3µw 1 w,被设计成一个显微镜功率传感器,答案激发荧光测量的需要。该传感器的占地面积为76.0 mm x 25.2 mm,与标准的显微镜载玻片相匹配。传感区域是受保护的,并且是可清洁密封的,因此它可以在水或甘油等浸没介质中测量,也可以在空气中测量。传感器有1.5米长的电缆连接到仪表或PC接口。


厂家介绍:

Newport是的供应商,为科研、微电子制造、航天和防御/安全、生命和健康科学以及工业制造市场的客户提供技术的产品和系统。Newport成立于1969年,利用其在高功率半导体、固态和超快激光器、光子仪器、亚微米定位系统、隔振、光学子系统以及自动化领域的知识,提升客户在生产制造以及科研应用的能力和工作效率。我们与Newport厂商有长久的合作历史,能够为客户提供完整解决方案,包括设计、测试和制造。


产品规格图



产品特点:


Low Angular Dependence for high N.A. objectives

There is a particular challenge with these measurements due to the strongly converging light coming through high N.A. objectives. When attempting to use standard photodiode sensors the measurement will be inaccurate since the responsivities of photodiode sensors have angular dependence and a large percentage of light is incident at high angles. When there is a need for accurate absolute measurements the ideal solution would be to use an integrating sphere, however, the physical constraints of microscope setups make integrating spheres measurements cumbersome and sometimes impossible. We designed the sensor so that the angular response of 818-MSCOPE is relatively flat making it insensitive to the high angles of incidence of the incoming light.


Suitable for air, water or oil immersion objectives

818-MSCOPE has a smooth cleanable active area of the sensor. In addition to working in air, it is easy to use water and oil immersion objectives by directly applying the water/oil to the sensor surface.


Alignment target on the sensor body

The 818-MSCOE works the best when focused light from the objective is centered on the active area of the sensor. This can be accomplished by first adjusting the system so that light is centered on the target on the backside of the sensor and then flip the sensor around for the measurement.


NIST-traceable Sensor Calibration

Our calibrated photodiode sensors include a full spectral response calibration utilizing NIST-traceable standards calibrated with high-precision equipment maintained in Newport’s optical detector calibration facility. Tight calibration facility and process control allows the tightest calibration uncertainty in industry. Each detector is shipped with the calibration data, which is electronically stored inside the detector’s EEPROM. A certificate of calibration as well as the calibration data are shipped with each detector. To maintain accuracy and guarantee performance, Newport recommends annual photodiode detector calibration.



产品应用:


这个 818-MSCOPE 的传感器形状像一个显微镜载玻片,因此它可以在显微镜上测量激光的光功率

  • 适用于显微镜物镜后的测量

  • 高N.A.目标的低角度依赖

  • 可以使用空气,水或油浸目标


产品尺寸图,可参考:


相似系列产品:

1、型号:818-RAD

产品描述:FC/PC 光纤适配器,818 和 918D 系列传感器

2、型号:918D-SL-OD3R

产品描述:硅探测器,400-1100nm,OD3衰减器,DB15

3、型号:919P-003-10

产品描述:热电堆传感器,3W,10mm,0.19-10.6um


能与本产品 818-MSCOPE 兼容的产品:


1、型号:1919-R

产品描述:手持式光功率计

2、型号:843-R-USB

产品描述:经济型手持式激光功率/能量计,843-R-USB

3、型号:843-R

产品描述:经济型手持式激光功率计,843-R

4、型号:841-PE-USB

产品描述:光功率和能量计,虚拟,USB


注意:具体请咨询,网上标价不作为实际出售。

如果想了解更多产品信息以及货期,可致电我司咨询,青岛森泉光电有限公司。

我司提供可靠的产品和完善的服务,为您提供光电帮助。


关于我们:

森泉光电是从事光电相关领域仪器设备代理与系统集成业务的综合性服务商,专注于光电产品及辅助设备的代理与销售,业务范围涵盖国内各大高校、科研院所及众多企业,深受广大用户欢迎。

更多产品详情,您可登录查看:www.sourcescn.com


上一篇: BLOCK Mini-QCL 适用于OEM客户 宽范围
下一篇: Newport工业级顶部调节式调整架
我要评论
文明上网,理性发言。(您还可以输入200个字符)

所有评论仅代表网友意见,与本站立场无关。

请选择省份

  • 安徽
  • 北京
  • 福建
  • 甘肃
  • 广东
  • 广西
  • 贵州
  • 海南
  • 河北
  • 河南
  • 黑龙江
  • 湖北
  • 湖南
  • 吉林
  • 江苏
  • 江西
  • 辽宁
  • 内蒙古
  • 宁夏
  • 青海
  • 山东
  • 山西
  • 陕西
  • 上海
  • 四川
  • 天津
  • 新疆
  • 西藏
  • 云南
  • 浙江
  • 重庆
  • 香港
  • 澳门
  • 台湾
  • 国外
=
同类优质产品

在线询价

X

已经是会员?点击这里 [登录] 直接获取联系方式

会员登录

X

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~