Surge Protection Barrier M-LB-2.275TT.D
Surge protection for 2 supply lines
Type 2 acc. to EN 61643-11
For TT and TN systems (230 V AC)
Pre-wired unit
Operating state and fault indication of every protected line
Fault indication output
DIN rail mountable
方便组态
无需多余的费用即可拥有SIL等级
加入查看列表
产品组合供电导轨插入标准的35mm DIN导轨内,只需简单的固定安装到位即可。供电导轨在给模块供电的同时,还可以采集各个模块的故障信息。使用导轨供电的方式极大的减少了布线和维护的费用,同时方便扩展。当需要增加新的模块时,只需要将模块插在供电导轨上。
安全标准
供电模块
供电导轨插入标准的35mm DIN导轨内,只需简单的固定安装到位即可。供电导轨在给模块供电的同时,还可以采集各个模块的故障信息。使用导轨供电的方式极大的减少了布线和维护的费用,同时方便扩展。当需要增加新的模块时,只需要将模块插在供电导轨上。
供电导轨
K系列产品为用户提供了广泛的本安接口仪表解决方案,可以将很多简单信号转换成为高级功能模块能够识别的信号。
使用我们强大的软件工具-Pactware,能够方便的生成项目文档,同时方便的组态和设置模块。
Pre-wired unit倍加福M-LB-2.275TT.D电源浪涌保护器上海冠宁Pre-wired unit倍加福M-LB-2.275TT.D电源浪涌保护器上海冠宁倍加福M-LB-2.275TT.D倍加福M-LB-2.275TT.D
上海冠宁科技发展上海冠宁科技发展有限公司2006年成立于中国上海,是一家代理经销品牌工控自动化安全栅(电气元器件)产品服务商,集科工贸于一体的系统集成商。是德国倍加福P+F、菲尼克斯Phoenix、巴鲁夫Balluff、西克SICK、IFM易福门、费斯托FESTO、图尔克TURCK,英国MTL安全浪涌,美国邦纳BANNER、北极星Northstar,日本光洋KOYO、SMC、喜开理CKD、欧姆龙OMRON,中国格立特Great等的合作伙伴,致力于电气自动化、气动液压、仪器仪表等产品在中国的推广、服务与销售。
35 V DC倍加福KFD2-STC4-EX1-Y122583酸洗设备安全栅上海冠宁35 V DC倍加福KFD2-STC4-EX1-Y122583酸洗设备安全栅上海冠宁
参数表节选:的技术参数 KFD2-STC4-Ex1-Y122583
产品阐述 | ||
---|---|---|
Input 0/4 mA ... 20 mA Output 0/4 mA ... 20 mA (current sink) |
General specifications | ||
---|---|---|
Signal type | Analog input | |
Supply | ||
Connection | Power Rail or terminals 14+, 15- | |
Rated voltage | 20 ... 35 V DC | |
Ripple | within the supply tolerance | |
Power consumption | 1.9 W | |
Input | ||
Connection | terminals 1+, 2-, 3 or 5-, 6+ | |
Input signal | 0/4 ... 20 mA | |
Voltage drop | ≤ 2.4 V at 20 mA (terminals 5, 6) | |
Input resistance | ≤ 64 Ω terminals 2-, 3 ; ≤ 500 Ω terminals 1+, 3 (250 Ω load) | |
Available voltage | ≥ 16 V at 20 mA terminals 1+, 3 | |
Output | ||
Connection | terminals 7+, 8- | |
Output signal | 0/4 ... 20 mA (overload > 25 mA) | |
Ripple | max. 50 µA rms | |
External supply (loop) | 11 ... 30 V DC | |
Transfer characteristics | ||
Deviation | at 20 °C (68 °F), 0/4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage | |
Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V pp signal 0.3 ... 7.5 kHz (-3 dB) | |
Settling time | 200 µs | |
Rise time/fall time | 20 µs | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2004/108/EC | EN 61326-1:2006 | |
Conformity | ||
Electromagnetic compatibility | NE 21:2006 | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | approx. 200 g | |
Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | BAS 99 ATEX 7060 , for additional certificates see | |
Group, category, type of protection | II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC | |
EC-Type Examination Certificate | DMT 01 ATEX E 133 | |
Group, category, type of protection | I (M1) [Ex ia] I | |
Statement of conformity | TÜV 99 ATEX 1499 X , observe statement of conformity | |
Group, category, type of protection, temperature class | II 3G Ex nA II T4 [device in zone 2] | |
Directive conformity | ||
Directive 94/9/EC | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000 | |
International approvals | ||
UL approval | ||
Control drawing | 116-0173 (cULus) | |
IECEx approval | IECEx BAS 04.0016 | |
Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
Classifications
System | Classcode |
---|---|
ECLASS 11.0 | 27210119 |
ECLASS 10.0.1 | 27210119 |
ECLASS 9.0 | 27210119 |
ECLASS 8.0 | 27210119 |
ECLASS 5.1 | 27210119 |
ETIM 8.0 | EC001485 |
ETIM 7.0 | EC001485 |
ETIM 6.0 | EC001485 |
ETIM 5.0 | EC001485 |
UNSPSC 12.1 | 32101514 |
所有评论仅代表网友意见,与本站立场无关。