产品简介
microEnable5marathonACX-SP是一款PCIe图像采集设备,可连接一台CoaXPress相机,带宽为25Gbit/s
详情介绍
microEnable 5 marathon ACX-SP是一款PCIe图像采集设备,可连接一台CoaXPress相机,带宽为25 Gbit/s。
microEnable 5 marathon ACX-SP专门用于高速图像采集,最多可连接1台CoaXPress相机,并提供DMA1800技术,能获得功能强大的高级机器视觉应用。
支持的CoaXPress相机输入
可轻松配置软件
高性能的图像采集功能
针对工业用途的单链路CoaXPress相机进行优化
DMA 1800 / 高达1800 MB/s的PCIe数据带宽(PCIe x4 Gen2)
支持通过前端I/O传输光电解耦(opto-decoupled)信号
广泛支持第三方软件接口
多样化的应用和行业用途
灵活和可扩展的型号系列
可通过CoaXPress接口进行供电。
文章详情 |
---|
项目编号 | 2200000356 |
配件类型 | 图像采集卡 |
品牌 | Basler |
型号名称 | microEnable 5 marathon ACX-SP |
产品线 | A-Line |
Framegrabber Series |
类别 | 图像采集卡 |
设备功能 |
---|
处理器 | System Processor |
板载内存 | 1 GByte DDR3-RAM |
相机接口 |
---|
标准 | CoaXPress 1.0/1.1 |
配置 | CXP1-6; 1 camera |
接头 | 1 x DIN 1.0/2.3 |
功率输出 | SafePower, Power over CXP 13W/24V per cable |
相机支持 | line scan camera, area scan camera |
芯片类型 | CFA sensor (Bayer), Grayscale sensor, RGB sensor |
位深 | 8-16-bit (grayscale), 24-48-bit (color) |
数据带宽 | 1 x 6,25 Gbit/s |
测试环境 | Camera Simulator |
主机PC接口 |
---|
PC总线接口 | PCI Express x4 (Gen 2), DMA1800 |
PC总线接口性能 | up to 1.800 MB/s (sustainable) |
控件和通用I/O |
---|
板载GPIO接口 | 4 opto-coupled outputs (4,5V - 28V), 4 opto-coupled inputs (4,5V - 28V), optional 2 opto-coupled differential inputs (RS422), Shaft encoder input, programmable rescaler, multiple-camera synchronization |
板载前端GPIO接口 | 2 opto-coupled differential inputs (RS422) and 1 opto-coupled differential / single ended input, optional (conf.): 4 opto-coupled Inputs (4,5V - 28V) with up to 1 MHz frequency, RS485 interface (PLC connection) scheduled, Shaft encoder input, programmable rescaler: multiple-camera synchronization, 2 TTL outputs, up to 20 MHz frequency |
GPIO同步和控制 | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
GPIO接口概述 | 8in/8out (max.), TTL or opto-coupled |
处理功能 |
---|
基本功能 | Offset/Gain/Gamma correction, Invert, ROI, White Balance, Mirroring, Image Selector, LUT |
物理和环境信息 |
---|
尺寸 | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
功耗/电源 | typ. 0.8 A @ 12V (actual values depend on image pre-processing) |
操作温度 | 50° (0 LFM*), 60° (100 LFM) FPGA operating temperature: 0°C to 85°C |
存储温度 | -50°C up to 80°C |
相对湿度(操作、存储) | 5% - 90% non-condensing (operating), 0% - 95% (storage) |
MTBF | pending |
合规 | WEEE, RoHS, REACH |
软件 |
---|
软件驱动程序 | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit) |
软件工具 | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), microDiagnostics (Service tool), Device Drivers, SDK, Documentation |
软件API | Silicon Software SDK, .net interface |
FPGA编程 | not programmable |
BV-软件兼容性 | Halcon, Common Vision Blox, others on request |
- 上一篇: 工业相机EVT相机HR-2000 10G 万兆网相
- 下一篇: Basler图像采集卡RAP 8G 4C12 P602 连
所有评论仅代表网友意见,与本站立场无关。