1、高铁专用轨枕模具生产厂家——河北宏旭模具厂。
2、 高铁专用轨枕模具用途:
金矿、铜矿、煤矿等。
3、 高铁专用轨枕模具规格:
长度:100cm、120cm、135cm、140cm、150cm、180cm
宽度:13cm、15cm、20cm
深度:14cm、15cm、16cm、18cm、20cm等(可按图纸定做);
4、矿山轨枕型号:
15kg、18kg、30kg、38kg、50kg、60kg、70kg等;
5、 高铁专用轨枕模具使用方法:
首先在矿山高铁专用轨枕模具内壁喷一层机油或是脱模剂,方便脱模,在模具中间放入钢筋架,然后将搅拌好的混凝土灌入模具内,尽量填满每个缝隙边角,其次在振动平台上振动或用振动棒振捣,几秒钟即可,后将模具放在干燥的地方,等混凝土初期凝固后出模成型,约24小时左右即可 Hebei Hongxu mould factory, a high-speed rail sleeper mould manufacturer.
2. Purpose of high speed rail special sleeper mould:Gold, copper, coal, etc.
3. Specification of special sleeper mould for High-speed Railway:
Length: 100cm, 120cm, 135cm, 140cm, 150cm, 180cm
Width: 13cm, 15cm, 20cm
Depth: 14cm, 15cm, 16cm, 18cm, 20cm, etc. (can be customized according to the drawing);
4. Model of mine sleeper:
15kg, 18kg, 30kg, 38kg, 50kg, 60kg, 70kg, etc;
5. Usage of high speed rail special sleeper mould:
First, spray a layer of engine oil or release agent on the inner wall of the mould for the special high-speed railway sleeper in the mine to facilitate the demoulding. Put the steel frame in the middle of the mould, then pour the mixed concrete into the mould, and try to fill the corner of each gap as much as possible. Next, vibrate it on the vibration platform or vibrate it with a vibrator for a few seconds, and then place the mould in a dry place. After the initial setting of the concrete, the mould will come out Molding, about 24 hours.
所有评论仅代表网友意见,与本站立场无关。