BUSCHJOST电磁阀安装指导
对于3/2路先导阀孔97100 NAMUR模式
机身材质铝合金elox
先导流体温度-10°C+50°C
先导压力：2 - 8条
标准电压24 V DC，24 V AC，230 V AC

对于3/2路先导阀孔97100 NAMUR模式
设计ACC。根据DIN VDE 0580
电压范围±10％

BUSCHJOST电磁阀安装指导
占空比（ED）100％
防护等级符合EN 60529 IP65
插座累计。符合DIN EN 175301-803（包含）

此外选项（阀门）
XXXXX01.XXXX常开，与先导压力和关闭
弹簧力打开
（先导压力1 - 6条）
XXXXX08.XXXX双作用;
4/2或5必需/ 2路，先导阀
XXXXX23.XXXX双电气位置指示器
与2个电磁开关
XXXXX50.XXXX NAMUR接口板
根据要求：几席NBR，FPM，EPDM
行程限制
消音器

for 3/2-way pilot valve 97100 hole pattern NAMUR
Material body aluminium elox
Pilot fluid temperature –10 °C to +50 °C
Pilot pressure: 2 – 8 bar
Standard voltages 24 V DC, 24 V AC, 230 V AC
Data
for 3/2-way pilot valve 97100 hole pattern NAMUR
Design acc. to DIN VDE 0580
Voltage range ± 10 %
Duty cycle (ED) 100 %
Protection class to EN 60529 IP65
Socket acc. to DIN EN 175301-803 (included)

Further Options (Valves)
XXXXX01.XXXX Normally open, closes with pilot pressure and
opens with spring force
(pilot pressure 1 – 6 bar)
XXXXX08.XXXX Double acting;
4/2 or 5/2-way-pilot valve required
XXXXX23.XXXX Double electrical position indicator
with 2 solenoid switches
XXXXX50.XXXX NAMUR interface plate
On Request: Several seats NBR, FPM, EPDM
stroke limiter
silencer