SMC压力调节器VFA5120-03N,SMC速度控制器VFA5120-02N
SMC成型部分) 一:SMC简介 SMC成型工艺是将片状模塑料放到已经加热到温度的模具中,通过液压机 加压,使熔融片状模塑料均匀的充满模腔,再经过一段时间的保压加热固化成型。SMC具有优越的电气性能,耐腐蚀性能,质轻及工程设计容易、灵活等优点,其机械性能可以与部分金属材料相媲美,因而广泛应用于运输车辆、建筑、电子/电气等行业中。 二:SMC使用的材料 SMC的主要由树脂、固化剂、填料、增稠剂、脱模剂、色浆和低收缩剂以及SMC纱等构成。
Note 1) In case of single type, be certain that supply pressure within operating pressure range be supplied to
supply port, because return pressure is introduced from supply port 1(P) for activation.
Note 2) Use turbine oil Class 1 (ISO VG32) if lubricating.
Note 3) Impact resistance: No malfunction from test using drop impact tester, to axis and right angle
directions of main valve, each one time when pilot signal is ON and
OFF. (Value in the initial stage)
Vibration resistance: No malfunction from test with 45 to 2000 Hz one sweep, to axis and right
angle direction of main valve, each one time when pilot signal ON and
OFF. (Value in the initial stage)
SMC压力调节器VFA5120-03N,SMC速度控制器VFA5120-02N
| |||||||||||||||||||||||||||
弹性密封 | |||||||||||||||||||||||||||
|
VFRA3111-02
VFRA3111-03
VFRA3211-02
VFRA3211-03
VFRA3311-02
VFRA3311-03
VFRA3411-02
VFRA3411-03
VFRA3511-02
VFRA3511-03
6051197 TBS-1DSGT0256FE
6051349 TBS-1BSG10506FM
6051619 TBS-1ISN21006ZE
6051662 TBS-1ASGT3506NM
6051883 TBS-1GSGT1506NM
6051884 TBS-1ISGT1506NE
6051885 TBS-1GSG11506NM
6051886 TBS-1ISG11506NE
6052188 TBS-1ISN20506ZE
6052669 TBS-1GSN43506ZM
6052670 TBS-1GSN23506ZM
6052671 TBS-1FSN43506ZM
6052672 TBS-1FSN23506ZM
6053202 TBS-1BSGT3506FM
6053475 TBS-1DSN40256ZE
6053480 TBS-1HSGT2506NM
6053588 TBS-1CSN21006ZM
6054340 TBS-1DSGT0256NE
所有评论仅代表网友意见,与本站立场无关。