XJC-H25压力传感器
详细介绍
特点 Feature
◆XJC-H25采用高精度电阻应变式原理
◆可满足 9.8N-490.0N范围内的力测量。
◆不锈钢材料,密封焊接,防油、防水、耐腐蚀
◆圆型结构设计,压式承载,安装使用方便灵活。
◆安全防爆型产品,可用于恶劣环境及危险性场合。
◆不锈钢材料
◆体积小巧,外型美观
◆动态响应频率高,高精度
◆XJC-H25 adopts high-precision resistance strain principle
◆Meet force measurement in the range of 4.9N-490.0N.
◆ Stainless steel material with sealed welding, oil, water, corrosion resistance
◆Round structural design, pressure-bearing, easy to install.
◆ Safe and explosion-proof product suitable for harsh environments and dangerous situations.
◆ Aluminum / stainless steel
◆ Small size, beautiful appearance
◆ High dynamic response frequency
XJC-H25压力传感器
技术参数(Technical specifications):
量程 Capacity | 0-(49N-490N)(5KG-50kg) | 材质 Material
| 不锈钢Stainless steel | 安装受力方式(Load direction): |
精度 Accuracy | 0.1% F.S. | 输出灵敏度 Rated output | 2.0mV/V |
|
使用电压力 Recommended excitation | 5-10VDC | **使用电压 Maximum excitation | 10V | |
固有频率 Natural frequency | ≥2KHZ | 温度补偿范围 Compensated temp range | - 10 ~ 60 ºC | |
滞后 Hysteresis | 0.1% F.S. | 工作温度 范围 Operating temp range | - 20 ~ 80 ºC | |
重复性 Repeatability
| 0.05% F.S. | 绝缘电阻 Insulation
| ≥5000MΩ/100VDC | |
输入阻抗 Input impedance | 350(700) ± 5 Ω | 输出阻抗 Output impedance | 350(700)± 5 Ω | 接线图(Wiring code): |
蠕变 (30分钟) Creep (30min) | 0.1% F.S. | 温度灵敏度漂移 Temp effect on output | 0.05% F.S. / 10ºC |
|
零点输出 Zero balance | ± 2% F.S. | 零点温度漂移 Temp effect on zero | 0.05% F.S. / 10ºC | |
安全超载 Safe load limit | 150% | 极限超载 Ultimate load limit | 200% | |
电缆线尺寸 Cable size | ?5 x3m | 使用寿命 Life | 满量程100万次以上 Full scale more than 1 million times | |
电缆线连接方式 Wire connection | Ex + : 红 Red; Sig + : 绿 Green; Sig - : 白 White |
| ||
选型说明:Ordering guide: 型号(MDL)——量程(CAP)——高度(H)——出线方式Cable out——特殊需求Special requirements——智能模块description smart modules | ||||
主要应用 Applications 汽车,医疗,机器人,电子,机械设备,自动化设备等 Automotive, medical, robot, electronic, mechanical equipment, automation equipment, etc 例如:按键手感度测试仪,冷热压机压力检测,机器人手抓力等安装空间小的力值检测领域 Force measurement in small space installation, such as feeling tester for keyboard switch, compression force measurement for hot and cold lamination machine, and grasping force measurement for robotic hands |
所有评论仅代表网友意见,与本站立场无关。