产品参数
| 项目 | DESCRIPTION | UNIT | BL150FE | |||
| 标准规格 | International specification | 365/1500 | ||||
| 注射部分 | 螺杆直径 | Screw diameter | A | B | C | |
| mm | 32 | 36 | 40 | |||
| 螺杆长径比 | Screw ratio | 23 | 20 | 18 | ||
| 理论注射容积 | Theoretical injection capacity | cm3 | 130 | 165 | 201 | |
| 注射量 (以PS计) | Shot weight(PS) | g | 120 | 150 | 185 | |
| oz | 4.2 | 5.3 | 6.5 | |||
| zui大注射速度 | Injection piston speed | mm/s | 300 | |||
| 注射速率 | Injection rate | g/s | 260 | 330 | 405 | |
| 注射压力 | Injection pressure | MPa | 280 | 220 | 180 | |
| 射胶行程 | Injection stroke | mm | 160 | |||
| zui大螺杆转速 | Max. Screw speed | r/min | 400 | |||
| 锁模部分 | 锁模力 | Clamping force | Ton | 153 | ||
| kN | 1500 | |||||
| 开模行程 | Opening stroke | mm | 530 | |||
| 拉杆内间距 | Space between tie bar | mm×mm | 560×510 | |||
| zui小模具厚度 | Min. mould height | mm | 200 | |||
| zui大模具厚度 | Max. mould height | mm | 560 | |||
| zui大模板距离 | Max. distance Platen | mm | 1090 | |||
| 顶出行程 | Ejector stroke | mm | 150 | |||
| 顶出力 | Ejector force forward | kN | 35 | |||
| 顶出杆数 | Number of ejector bar | PC | 5 | |||
| 其它 | 总驱动功率 | kW | 52 | |||
| 电热功率 | Heater power | kW | 8 | |||
| 温控区数 | Number of temp. zones | 3+1 | ||||
| 机械外形尺寸 | Machine dimensions(L×W×H) | m×m×m | 5.0×1.35×2 | |||
| 机器重量 | Machine weight | Ton | 6 | |||
所有评论仅代表网友意见，与本站立场无关。