配电脑控制，变频调速。氮化螺杆机筒配混炼头。带覆膜机头,生产双层塑料桶(瓶)
，可带透明液位线，单色也可一模二瓶或四瓶。
| 吹塑zui大容量 | Large capacity that blow molding the most | 20L |
| 模板尺寸（宽×高） | The template size(W×H） | 600×500mm |
| 锁 模 力 | Clamping force | 50KN |
| zui小容模厚度 | Min. mould thickness | 120mm |
| 模板zui大开距 | Max. space between platens | 600mm |
| 主机螺杆直径 | Host computer screw diameter | 75mm |
| 长径比 | Screw L/D ratio | 25：1 |
| 副机螺杆直径 | One pair of machines screw diameter | 30mm |
| 长径比 | Screw L/D ratio | 30：1 |
| 液位线螺杆直径 | Liquid location line screw diameter | 25mm |
| 长径比 | Screw L/D ratio | 25：1 |
| 螺 杆 转 速 | Screw speed | 20-60rpm |
| zui大塑化能力 | Max. plasticating capacity(PE) | 45kg |
| 主电机功率 | The electrial machinery merit rate | 15KW |
| 油泵电机功率 | Extruder driving power | 7.5KW |
| 加热功率 | Heating power | 16KW |
| 加热总段数 | Number of barrel zone | 11 |
| 机组总质量 | The machine weight(T) | 3200kg |
| 整机外形尺寸（长×宽×高） | The mould size outside（L×W×H） | 2.9×1.7×2.5m |
所有评论仅代表网友意见，与本站立场无关。