EOT >10GHz探测器 直流至22GHz
EOT>10 G光电探测器内置的PIN光电二极管,通过光伏效应将光功率转换成电流。 当通过50欧姆电阻连接到示波器时,可以测量激 光器的脉宽。当通过50欧姆电阻连接到光谱分析仪时,可以测量激光器的频率响应。EOT>10 G光电探测器采用内置偏压电源,锤电池寿 命很长。通过一根同轴电缆连接光电探测器的BNC输出口,并通过50欧姆电阻连接示波器或光谱分析仪,就足以运行。
特点:
占地面积小
内部电压偏置
直流至22 GHz
应用:
监测调Q激光器的输出
监测锁模激光器的输出
监测外部调制的连续波激光器的输出
高频外差应用
时域和频率响应测量
技术参数:
Product specifications are subject to change. All products are RoHS compliant.
a.Photodetectors have an internal 50 Ω termination. Responsivity data applicable to diode only. Detector output should be determined based on 1/2 the responsivity of that shown on graph.
b.Noise Equivalent Power (NEP) is determined via open circuit output.
c.Multi-mode fiber available. May limit bandwidth.
NOTE: All specifications apply for a 50 Ω termination unless otherwise noted.
注意:具体请咨询,网上标价不作为实际出售。
如果想了解更多产品信息以及货期,可致电我司咨询,森泉光电有限公司。
我司提供可靠的产品和完善的服务,为您提供光电帮助。
所有评论仅代表网友意见,与本站立场无关。