TSP–BFM24 Buffer Module

DC24V电源输出缓冲模块TSP-BFM24 

The TSP-BFM24 buffer module will hold the output voltage of a 24 VDC power supply

after brown outs or voltage dips of ten 50 Hz cycles at full road. During this buffer period

no deterioration of the 24 VDC output voltage will occur. For many applications

this buffer module is an ideal and cost effective alternative to a battery based backup

system. The buffer module consists of a large bank of capacitors. When the power

supply is switched on, the buffer capacitors will be charged. This will take approximately

30 second and an opto-coupler signal indicates the “READY“ condition. When

a power fail occurs, the capacitor bank is discharged, maintaining the output of the

buffer module at its nominal voltage. This condition is indicated by an “POWER FAIL“

signal. The hold up time is typically 200 ms at 25 A and 4 seconds typically at 1,2 A.

After 4 seconds the buffer device will switch off the output voltage. The operating

modes of the module are also indicated by a LED on the front panel also. The major

advantage of this buffer solution is, that it is fully maintenance free and its storage

capability does not deteriorate over the live time of the product.

型号        电压操作范围   缓冲时间                             输出功率

TSP-BFM24   24...28VDC  200ms typ. @ 25A max. （4.0 s max. @1.2A）   600 W

具体资料：

DC24V电源输出缓冲模块TSP-BFM24