microEnable 5 ironman AD8-PoCL是一款PCIe图像采集设备，可让两台Camera Link标准化相机实现全带宽连接。
microEnable 5 ironman AD8-PoCL专门利用Camera Link相机进行高速图像采集，并提供DMA3600技术和色彩预处理功能，能全面获得高级机器视觉的彩色应用。
文章详情 |
|---|
| 项目编号 | 108095 |
| 配件类型 | 图像采集卡 |
| 品牌 | Basler |
| 型号名称 | microEnable 5 ironman AD8-PoCL |
| 产品线 | A-Line |
| Framegrabber Series |
| 类别 | 图像采集卡 |
设备功能 |
|---|
| 处理器 | System Processor |
| 板载内存 | 1 GByte DDR3-RAM |
相机接口 |
|---|
| 标准 | Camera Link 2.0 |
| 配置 | CL-full, CL-deca (80bit), Including non-Standard formats: Bilinear color |
| 接头 | 2 x MDR26 |
| 功率输出 | PoCL SafePower, 4W/12V per cable |
| 相机支持 | line scan camera, area scan camera |
| 芯片类型 | CFA sensor (Bayer), Grayscale sensor, RGB sensor |
| 位深 | 8-16-bit (grayscale), 24-48-bit (color) |
| 数据带宽 | 850 MB/s |
| 测试环境 | Camera Simulator |
主机PC接口 |
|---|
| PC总线接口 | PCI Express x8 (Gen 2), DMA3600 |
| PC总线接口性能 | up to 3.600 MB/s (sustainable) |
控件和通用I/O |
|---|
| GPIO同步和控制 | Configurable Trigger System supporting several trigger modes (grabber controlled, external trigger, gated, software trigger) and shaft encoder functionality with backward compensation, Multi-Camera-Synchronization |
| GPIO接口概述 | 8in/8out (max.), TTL or opto-coupled |
处理功能 |
|---|
| 基本功能 | Tap Sorting (Sensor Readout Correction), Offset/Gain/Gamma correction, Invert, ROI, Image Selector, LUT |
物理和环境信息 |
|---|
| 尺寸 | PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
| 功耗/电源 | 14 V, 2.5 A |
| 操作温度 | 0 - 50°C (32°F - 122°F) |
| 存储温度 | -50 - 80°C (-58°F - 176°F) |
| MTBF | on request |
| 合规 | WEEE, RoHS, REACH |
软件 |
|---|
| 软件驱动程序 | Windows 10 / 8 / 7 (32-Bit), Windows 10 / 8 / 7 (64-Bit), Linux 32-Bit, Linux 64-Bit |
| 软件工具 | microDisplay (Acquisition control and viewer), GenICam Explorer (Camera configuration tool), Documentation, microDiagnostics (Service tool), SDK, Device Drivers |
| 软件API | Silicon Software SDK, .net interface |
| FPGA编程 | not programmable |
| BV-软件兼容性 | Common Vision Blox, Halcon |
所有评论仅代表网友意见，与本站立场无关。