XK-450B(18)-青岛博瑞嘉设计生产XK400系列硬齿面轴承开放式炼胶机-青岛博瑞嘉科技机械有限公司

一．用途

主要用于橡胶的热炼，压片，塑炼及混炼。

二．结构特点

1.滚筒材料为冷硬铸铁，表面坚硬耐磨辊筒结构有钻孔或中空方式进行加热或冷却，使辊面温度均匀。

2.传动系统用硬齿面减速器，结构紧凑噪音低，效率高。

3.辊筒采用调心轴承，耗能低，维修方便，使用寿命长。

4.机器设有液压力和电动力反转制动装置，当发生紧急事故时，按下开关，机器立即制动或反转，安全可靠。

5.润滑系统采用一体循环润滑式，减少漏油现象。

XK series rubber mixing mill

一．Usage

It mainly used for thermal refining, sheeting, plasticating and mixing of the rubber.

二． Structure &features

1. Roller material is Chilled cast iron, with hard & abrasion-resistant surface. Roller structure: hole drilling style or hollow style is used for heating or cooling to make even temperature for the roller surface.

2. Transmission device uses harden gear speed reducer, compact structure, efficient transmission, low noise.

3. Roller adopts self-aligning bearing, low energy consumption, easy to maintain, long lifespan.

With hydraulic &electrical reverse braking device, you can just press the switch when urgent accident happens, and machine will immediately brake or reverse, safe & reliable.
Lubricating system adopts the circulation lubrication type as an organic whole,seal structure with special design,saving the oil leaked.

型号model	XK-160	XK-230	XK-250	XK-360	XK-400	XK-450	XK-560
辊筒工作直径roll dia （mm）	160	230	250	360	400	450	560/510
棍筒工作长度roll working length （mm）	320	600	620	900	1000	1200	1530
前辊线速度front-roll liner speed （m/min）
辊筒速比roll ratio	1:	1:	1:	1:	1:	1:	1:
辊距max roll space（mm）		7	8	10	10	15	15
一次加胶量compound feeding capacity（kg）	1-2	6-10	8~15	20~25	18-35	25-50	35~60
电动机功率motor power （kw）		15		30	37	55	90
外形尺寸dimension：长(L)×宽(W)×高(H)（mm）	1380×860 ×1320	2800×1200 ×1120	3400×1500 ×1800	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978