型式 Type | NE | 検出方式 Detection Method | ロータリ・エンコーダ式 Rotary encoder type |
---|---|---|---|
電源 Power | LSEより供給 Supply from LSE | 出力パルス Output pulse | 5 パルス/mm 5 pulse/mm |
外囲器構造 Structure | 簡易防滴構造 Simple Drip proof | 塗装色 Color | マンセル 7.5 GY 7/2 Munsel No. 7.5 GY 7/2 |
計測範囲 Measuring range | ストローク(Stroke): 0~600 - 0~2000mm 速度(Speed): 0~100mm/min.(標準仕様)(Standard specification ) <演算器仕様により任意計測可能> <It is possible to change optional measuring range by the arithmetic unit specification.> | ||
可動範囲 range | MAX. 2100mm | ワイヤステ長さ Wire Discard Length | 2m |
リール張力 Reel Tension Power | 10N±50% | 重量 Weight | 1.4kg |
絶縁抵抗 Insulation resistance | 各端子-筐体間 100MΩ以上/DC.500V MIN. 100MΩ/DC.500V at Each terminal - Frame ground | ||
外部接続 Connection | 防水型金属コネクタ 七星 NJW-205 Waterproof metal connector NANABOSHI NJW-205 | ||
使用温度・湿度 Operating Temp Hum. | 0~55℃ 95%R.H.以下(結露不可) Within 95%R.H.(Disapprove of dew) |
型式 Type | LSE | 外囲器構造 Structure | 防塵構造 Dust proof |
---|---|---|---|
電源 Power | AC.85~264V 50/60Hz 1φ | 消費電力 Consumption power | 6VA(検出器含む) (A detector is included) |
アナログ出力 Analogue output | ストローク(Stroke):4~20mA 速度:4~20mA 100mm/min.時、20mA出力(標準仕様) Speed:4~20mA When it is 100mm/min 20mA is output. (Standard specification) | ||
絶縁抵抗 Insulation resistance | 各端子-筐体間 100MΩ以上/DC.500V MIN. 100MΩ/DC.500V at Each terminal - Frame Ground | ||
ディジタル出力 Digital Output | ストローク・速度をBCDで出力 (標準仕様)BCD output for stroke & speed.(Standard specification) ストローク・速度をバイナリーで出力 Binary output for stroke & speed. ストローク・速度を特殊グレイで出力 Special grary output for stroke & speed. 何れか1つ選択可能 One either can be selected. | ||
総合出力精度 Integrated output accuracy | ストローク(Stroke): MAX. ±0.4% F.S.(検出器を含む)(A detector is included) 速度(Speed): MAX. ±0.5% F.S.(検出器を含む)(A detector is included) | ||
外部制御端子 External control terminal | (S1)ストローク/速度切換: デジタル出力の値をストローク(オープン)・速度(ショート)何れか切換え。 Stroke/Speed Change: The change of the digital output is stroke (open) or speed (short). (S2)ストローク・速度リセット: ストローク値・速度値をゼロリセットします。ゼロリセットする事によりアナログ出力も4.00mAを出力します。 Stroke & Speed Reset: The stroke value and the speed value are zero reset. The analog output is 4.00mA by zero reset. (S3)速度停止: 速度信号のみを0にします。 Speed Stop: It makes speed signal 0. <入力論理は各々の端子をCOM(S4)に短絡してONになります。> <The input logic short-circuited each terminal with COM(S4) and becomes ON.> | ||
設定部 Setting unit | 液晶表示器とスイッチにて各種設定変更が可能。 Various setting change is possible with LCD(Liquid Crystal Display) and a switch. | ||
外部接続 Connection | 端子接続 (M3) Terminal connection (M3 for JIS Standard) | ||
使用温度・湿度 Operating Temp Hum. | 0~55℃ 95%R.H.以下(結露不可) Within 95%R.H.(Disapprove of dew) | ||
負荷抵抗 Load resistance | MAX.750Ω | ||
重量 Weight | 900g | 塗装色 Color | マンセル 7.5 GY 7/2 Munsel No. 7.5 GY 7/2 |
所有评论仅代表网友意见,与本站立场无关。