<用途>
土木工事、建設工事用機械の油圧ジャッキ等の移動量の検出 他
型式 Type | PWS | 検出方式 Detection Method | ポテンショ式 Potentiometer type |
---|---|---|---|
外囲器構造 Structure | 防滴構造 (IP55相当) Drip proof (IP55) | 塗装色 Color | マンセル 7.5 GY 7/2 Munsel No. 7.5 GY 7/2 |
計測範囲 Measuring range | ストローク(Stroke): 0~80 - 0~450mm | 全抵抗値 Total resistance | 5kΩ±5% |
可動範囲 range | MAX. 500mm/(可動範囲は計測範囲によって変わります。) (The range of movement changes depending on the range of the measurement.) | ||
ワイヤステ長さ Wire Discard Length | 2m | リール張力 Reel Tension Power | 10N±50% |
外部接続 Connection | ケーブル直出し形(MVVS 1.25s、3C、10m付け[ケーブルの長さは仕様による]) Attached cable MVVS 1.25sq,3C,10m (The length of the cable depends on the specification.) | ||
使用温度・湿度 Operating Temp Hum. | 0~55℃ 95%R.H.以下(結露不可) Within 95%R.H.(Disapprove of dew) | ||
絶縁抵抗 Insulation resistance | 各端子-筐体間 100MΩ以上/DC.500V MIN. 100MΩ/DC.500V at Each terminal - Frame ground | ||
重量 Weight | 0.7kg(ケーブル含まず) (A cable is excluded) | 付属品 Attachment | ワイヤークリップ Wire crip |
型式 Type | PR2 | 外囲器構造 Structure | 防塵構造、DINレール取付型(35mmレールを使用) Dust proof. DIN rail installation type (35mm rail is used). |
---|---|---|---|
電源 Power | AC.90~121V 50/60Hz 1φ | 消費電力 Consumption power | 3.5VA (検出器含む) (A detector is included) |
アナログ出力 Analogue output | ストローク(Stroke):4~20mA | ||
精度 Accuracy | ストローク(Stroke):±0.5% F.S (検出器を含む)(A detector is included) | ||
負荷抵抗 Load resistance | MAX.750Ω | ||
絶縁抵抗 Insulation resistance | 各端子-グランド端子間 100MΩ以上/DC.500V MIN. 100MΩ/DC.500V at Each terminal - Ground terminal | ||
使用温度・湿度 Operating Temp Hum. | 0~55℃ 95%R.H.以下(結露不可) Within 95%R.H.(Disapprove of dew) | ||
オートリセット機能 Auto reset function | 基準点設定範囲においてリセット操作により4mAを出力します。 リセット操作は機器前面押しボタンまたは、リセット端子の短絡により行います。 4mA is output by the reset operation within the range of the reference point setting. The reset operation is done by the short-circuit of an equipment front push-button or the reset terminal. | ||
メモリ機能 Memory function | 電源OFF時,出力記憶機能付 (10時間の通電で約20日間バックアップします) At power supply OFF. this with output memory function. (If the power supply was connecting for 10 hours. It backup by about 20 days) | ||
基準点設定範囲 Reference point. setting range | +10mm(基準点設定範囲は計測範囲によって変わります。) (The range of the reference point setting changes depending on the range of the measurement. ) | ||
外部接続 Connection | 端子接続 (M3) Terminal connection (M3 for JIS Standard) | ||
重量 Weight | 0.4kg | 塗装色 Color | 白色 White |
所有评论仅代表网友意见,与本站立场无关。