参数：
| 项目 ITEM | UNIT | A | B | C | D | |
| 注射装置 INJECTION UNIT | ||||||
| 螺杆直径 SCREW DIAMETER | mm | 90 | 95 | 100 | 105 | |
| 螺杆长径比 SCREW L/D RATIO | L/D | 23.2 | 22 | 20.7 | 15.9 | |
| 理论注射容积 SHOT VOLUME(THEORETICAL) | cm3 | 2767 | 3083 | 3416 | 3766 | |
| 注射重量(PS) INJECTION WEIGHT(PS) | g | 2515 | 2803 | 3105 | 3424 | |
| 注射压力 INJECTION PRESSURE | Mpa | 184 | 165 | 143 | 135 | |
| 注射速率 INJECTION RATE | g/s | 552 | 612 | 679 | 748 | |
| 螺杆转速 SCREW SPEED | r/min | 150 | ||||
| 锁模装置 CLAMPING UNIT | ||||||
| 锁模力 CLAMP FORCE | kN | 6080 | ||||
| 移模行程 OPEN STROKE | mm | 870 | ||||
| 拉杆间距(宽＊高)SPACE BETWEEN TIE BARS | mm | 850×850 | ||||
| zui大模厚 MAX MOLD THICKNESS | mm | 900 | ||||
| zui小模厚 MIN MOLD THICKNESS | mm | 350 | ||||
| 顶出力 EJECTOR FORCE | KN | 150 | ||||
| 顶出行程 EJECTOR STROKE | mm | 250 | ||||
| 其它 OTHERS | ||||||
| 油泵压力 MAX PUMP PRESSURE | MPa | 16 | ||||
| 电机功率 PUMP MOTOR POWER | kW | 30+37 | ||||
| 加热功率 HEATING POWER | kW | 42.95 | ||||
| 外形尺寸 MACHINE DIMENSION(L×W×H) | cm | 10.10×2.20×2.80 | ||||
| 机器重量 MACHINE WEIGHT | T | 28 | ||||
所有评论仅代表网友意见，与本站立场无关。