参数：
| 项目 ITEM | UNIT | A | B | C | D | |
| 注射装置 INJECTION UNIT | ||||||
| 螺杆直径 SCREW DIAMETER | mm | 90 | 100 | 100 | 115 | |
| 螺杆长径比 SCREW L/D RATIO | L/D | 24.4 | 22 | 20 | 19.1 | |
| 理论注射容积 SHOT VOLUME(THEORETICAL) | cm3 | 3052 | 3768 | 4560 | 4983 | |
| 注射重量(PS) INJECTION WEIGHT(PS) | g | 2775 | 3425 | 4145 | 4530 | |
| 注射压力 INJECTION PRESSURE | Mpa | 216 | 176 | 146 | 133 | |
| 注射速率 INJECTION RATE | g/s | 580 | 717 | 867 | 948 | |
| 螺杆转速 SCREW SPEED | r/min | 110 | ||||
| 锁模装置 CLAMPING UNIT | ||||||
| 锁模力 CLAMP FORCE | kN | 10800 | ||||
| 移模行程 OPEN STROKE | mm | 1000 | ||||
| 拉杆间距(宽＊高)SPACE BETWEEN TIE BARS | mm | 1080×1000 | ||||
| zui大模厚 MAX MOLD THICKNESS | mm | 1100 | ||||
| zui小模厚 MIN MOLD THICKNESS | mm | 400 | ||||
| 顶出力 EJECTOR FORCE | KN | 245 | ||||
| 顶出行程 EJECTOR STROKE | mm | 325 | ||||
| 其它 OTHERS | ||||||
| 油泵压力 MAX PUMP PRESSURE | MPa | 16 | ||||
| 电机功率 PUMP MOTOR POWER | kW | 37+45 | ||||
| 加热功率 HEATING POWER | kW | 59 | ||||
| 外形尺寸 MACHINE DIMENSION(L×W×H) | cm | 12.00×2.48×2.48 | ||||
| 机器重量 MACHINE WEIGHT | T | 53 | ||||
所有评论仅代表网友意见，与本站立场无关。