参数：
| 项目 ITEM | UNIT | A | B | C | D | |
| 注射装置 INJECTION UNIT | ||||||
| 螺杆直径 SCREW DIAMETER | mm | 110 | 115 | 120 | 125 | |
| 螺杆长径比 SCREW L/D RATIO | L/D | 23 | 22 | 21 | 20 | |
| 理论注射容积 SHOT VOLUME(THEORETICAL) | cm3 | 5319 | 5815 | 6330 | 6868 | |
| 注射重量(PS) INJECTION WEIGHT(PS) | g | 4835 | 5285 | 5754 | 6244 | |
| 注射压力 INJECTION PRESSURE | Mpa | 186 | 170 | 156 | 144 | |
| 注射速率 INJECTION RATE | g/s | 793 | 867 | 944 | 1024 | |
| 螺杆转速 SCREW SPEED | r/min | 110 | ||||
| 锁模装置 CLAMPING UNIT | ||||||
| 锁模力 CLAMP FORCE | kN | 12500 | ||||
| 移模行程 OPEN STROKE | mm | 1180 | ||||
| 拉杆间距(宽＊高)SPACE BETWEEN TIE BARS | mm | 1180×1100 | ||||
| zui大模厚 MAX MOLD THICKNESS | mm | 1200 | ||||
| zui小模厚 MIN MOLD THICKNESS | mm | 450 | ||||
| 顶出力 EJECTOR FORCE | KN | 245 | ||||
| 顶出行程 EJECTOR STROKE | mm | 325 | ||||
| 其它 OTHERS | ||||||
| 油泵压力 MAX PUMP PRESSURE | MPa | 16 | ||||
| 电机功率 PUMP MOTOR POWER | kW | 45+55 | ||||
| 加热功率 HEATING POWER | kW | 66.1 | ||||
| 外形尺寸 MACHINE DIMENSION(L×W×H) | cm | 13.30×2.66×2.66 | ||||
| 机器重量 MACHINE WEIGHT | T | 60 | ||||
所有评论仅代表网友意见，与本站立场无关。